configure a fxs port with
loopstart
progress tones for us
ring cadence of 25(00)ms on 25(00)ms off
ring frequency of 50hz
caller id number 3333
caller id name Joe Smith
plar to 4564
impedance 600complex ohms
gain on the input of 4 decibles
scale back volume by 2 db
add echo cancellation for 32 ms

configure fxo port with
groundstart
dtmf
1 ring before pickup

configure fxo port with 
groundstart
plar (immediate) to dn 5554

configure fxs port for
loopstart
did with wink-start
dial-peer to support DID and inbound 4 digit #

configure fxo cama trunk with
KP-0-NPA-NXX-XXXX-ST cama signaling

configure e&m port with
wiring type 1
2 wire operation
wink start

configure T1 with
esf
b8zs
getting clock from the router
fractional t1 using 12 channels of e&m wink start
13th channel fxo-loopstart
supporting voice-port for the 13th channel as signal loopstart
connect the voice-port to voice-port 0/0/0 as a cross connect
command to verify configured connections

configure ISDN with
switch type qsig
esf
b8zs
getting clock from the line
full 24 trunks